Negative Pressure Meter
Lavaink supplies all kinds of negative pressure meters for all machines. Also we will support you to set up this meter. Just simple email us if you need specific negative pressure meter. Please check the following videos to know how to set up.
This Negative Pressure Meter Automatic range switching is suitable for all uv printers.
Different setup for another negative pressure system
I set up this negative pressure meter output1 OFF output2 OFF. And output1 will be ON when output1 reach its max protect value. And output2 will be ON when output2 reach its max protect value.
The most important thing is that we need to get control signal from output1 or output2. there are 5 cables at most of meter. Power cable and ground wire and output1 output2 and data. Most of time, we do not use data cable.
Negative Pressure System Feature 1
Negative Pressure Meter Dimension
This Negative Pressure system is designed to control negative air throughput the whole uv ink line so as to maintain a constant pressure in a dynamic vacuum system. It is designed to work with negative air pressure meter having an electrical output signal and negative air inlet needle valves adaptable for drive by a small servo motor and 24V 7W negative Air pressure Pump at.
Automatic range switching meter come with automatic pressure controller. This negative pressure system is easy to set up to Automatic range switching mode. Most of uv printer negative air pressure range is from -1.5 Kpa to -4.0Kpa. If your local uv printer negative air pressure required is -2.8Kpa and you can set up this meter to -2.7Kpa to -2.9Kpa range. Negative pressure meter will automatically TURN OFF the Negative Air Pressure Pump once the negative air pressure increase up to -2.9Kpa and it will automatically TURN ON the Negative Air Pressure Pump once the negative air pressure decrease to -2.7Kpa. Your uv printer negative air ink line is perfect stable within range between -2.7Kpa and -2.9Kpa.
Negative Pressure System Feature 2
Industrial standard UV Printer like LavaPrint uv printer use negative pressure system to control uv ink line. The most important thing is how to keep uv ink line stable to get uv printer run smoothly with carefree. Maintaining ultraviolet radiation Ink. The ink line fully needs an ideal negative pressure. deficient negative pressure, and also the ink can drip out uncontrollably. an excessive amount of negative pressure, and also the ink are going to be sucked backwards and you’d not be ready to print. Even slightly more than best pressure might cause the ink flow to prevent within the middle of printing.
Good quality negative pressure system is the most important parts in all uv printers. Our negative air pressure system is easy to set up to Automatic range switching with automatic pressure controller. Precision is 0.01kPa but 0.1Kpa is good enough for uv printer negative air pressure ink line.
How to know negative air pressure line is sealed perfect?
The uv ink line is not stable due to poor sealed negative air pressure line and you can not print correct. Like ink dropping will damaged your printing job due to low negative air pressure. Air bubble go to printhead due to higher negative air pressure will cause your printing many binding to fail printing. That’s why stable and constant
Negative Pressure Meter Features
Negative Pressure Meter Monitor Automatic Range Switching Controller
Negative Pressure Meter Monitor UV Printer Automatic Range Switching Automatic Pressure Controller
High Precision 2% Error