Gerber UV Ink
Lavaink provides alternative solution for gerber uv printer. We have most of Gerber uv printer parts and uv ink at the lowest price but high quality and professional support. We have over 10 years experience in uv printer industrial and can give you best alternative solution at the an fraction price compare to OEM parts. We have gerber uv ink, gerber encoder strip, gerber ink pump gerber data cable etc.
Lavaink can convert your Gerber mercury uv lamp to Gerber led lamp services. Two Gerber led lamp cost is 2800USD and free installation in Great Toronto Area.
I see you sell Gerber Cationic ink replacement.
Q1. Does the system need to be flushed first before using this ink.
Q2. How do the bottles to replace the original pouch system in the machine.
are additional items needed.
The first thing is that you have to convert your lamp to led lamp and then you can use our ink.
The whole led system is 2800usd.
- Two led lamps can last at least 20000 hours
- Two power supplies
- Water cooling system
- All tubes for your machine.
- You just need to replace led lamp in the future and it cost 500usd each lamp.
No need to flush old ink.
We have free solution to convert your ink Pouch to ink bottle.
Just first time big invest but you save big money at lamps and also led lamp with very low heat and you can print at any media.
Gerber UV Ink Bag
Gerber UV LED Ink Magenta
Gerber UV LED Ink Yellow
Gerber UV LED Ink Black
Gerber UV LED Ink White
Gerber UV LED Ink Light Cyan
Gerber UV LED Ink Light Magenta
Gerber UV LED Ink Vanish
Gerber UV LED Ink Vanish
Gerber UV LED Ink Cleaning
Gerber LED UV Ink Bag
Cyan Gerber LED UV Ink
Magenta Gerber LED UV Ink
Yellow Gerber LED UV Ink
Black Gerber LED UV Ink
White Gerber LED UV Ink
Vanish Gerber LED UV Ink
Cleaning Gerber LED UV Ink
Ligh Cyan Gerber LED UV Ink
Light Magenta Gerber UV Ink
the specific storage ink GerberCAT * Temperature: 41 ° F to 77 ° F (5 ° C to 25 ° C) * Humidity: 25% – 75% non-condensing * Storing outside of the ranges of the above ink does not guarantee the appropriate printing results. Gerber Solara ion and Gerber CAT | UV environment to achieve the best results * Temperature: 65 F to 75 F (18.5 C to 24 C) * Humidity: 20% – 60% RH, non-condensing * Printer Operation outside of the ranges mentioned above does not guarantee the appropriate printing results. In the long term Shut Down If the printer will not be used for more than two weeks, you need to follow the steps in “Turning off the printer for more than two weeks,” which is in the Gerber Solara ion and Gerber CAT | UV own guides. This procedure includes special instructions for: * Cancellation ink from the ink lines * Fill the ink lines with GerberCAT Flush * Flush Clearing GerberCAT from the ink lines The manual also includes instructions on preparing your printer for use after it has been closed for more than four weeks. Determine the ink levels * Printer monitors ink usage and track level in the ink bag and ink tanks. * Determine the level of ink by pressing the button INK LEVEL Gerber Solara ion and Gerber CAT | UV. Not estimate the remaining ink by opening the ink cassette and observing and / or sensation bag. It is much less accurate. * Repeated opening and closing of the valve spool and weaken the cause of the bag ink leakage. * INK LEVEL displays the graphics screen. In the following example the cyan (C) is 75% full; Magenta (M) is full; Yellow (Y) is filled to 25%; and black (K) bag is empty and It must be replaced. Note: all the ink levels are approximate. Ink opening drawers * Do not open and close the ink cassette more than 10 times per bag. It will damage the ink valve and cause the bag to leak. * Be careful when closing drawers ink; They are equipped with sensitive sensors that can cause errors when handled or not.