Mimaki Printer Parts JV3
PRINT HEAD
M004905
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
PRINT HEAD
M004905
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
999.95USD/each
Mimaki Printer Parts JV3
INK DAMPER
M004902
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy.
INK DAMPER
M004902
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy.
19.95USD/each
Mimaki Printer Parts JV3
INK DAMPER
M004902
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy. This one is good for large solid area printing.
INK DAMPER
M004902
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy. This one is good for large solid area printing.
24.95USD/each
Mimaki Printer Parts JV3
CAP Assy
M004908
Cleaning is not performed efficiently and the white or dark lines appear in the printing image.
CAP Assy
M004908
Cleaning is not performed efficiently and the white or dark lines appear in the printing image.
39.95USD/each
Mimaki Printer Parts JV3
INK PUMP
M004868
Cleaning is not performed efficiently because ink is not sucked well. As a result, white or dark lines appear in the printing image.
INK PUMP
M004868
Cleaning is not performed efficiently because ink is not sucked well. As a result, white or dark lines appear in the printing image.
89.95USD/each
Mimaki Printer Parts JV3
Head Manifold Solvent Resistant
INT0050
Head Manifold Solvent Resistant
INT0050
49.95USD/each
Mimaki Printer Parts JV3
SCAN MOTOR
7876709010 When the Motor is broken or reaches its life, the Motor cannot obey the order from the CPU and it results in the Motor Error.
SCAN MOTOR
7876709010 When the Motor is broken or reaches its life, the Motor cannot obey the order from the CPU and it results in the Motor Error.
599.95USD/each
Mimaki Printer Parts JV3
PRINT HEAD CABLE
23475206 When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.
PRINT HEAD CABLE
23475206 When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.
14.95USD/each
Mimaki Printer Parts JV3
WIPER 11379105
Wiper cannot remove the foreign substances stuck on the surfaceof the head. In that condition, ink is not fired properly and thewhite or dark fine lines appear in the printing image.
WIPER 11379105
Wiper cannot remove the foreign substances stuck on the surfaceof the head. In that condition, ink is not fired properly and thewhite or dark fine lines appear in the printing image.
5.95USD/each
Mimaki Printer Parts JV3
Pump Tube Solvent Resistance D=4mm d=2mm
Pump Tube Solvent Resistance D=4mm d=2mm
9.95USD/Foot
Mimaki Printer Parts JV3
Ink Tube Solvent Resistance D=2.5mm d=1.5mm 64 feet
Ink Tube Solvent Resistance D=2.5mm d=1.5mm 64 feet
299.95USD/64 Feet
Mimaki Printer Parts JV3
Syringe
Syringe
29.95USD/Each
Mimaki Printer Parts JV3
1394 Firewire Board
E103898 E102161
If you have a problem of the computer not being able to see your JV3 or JV4 printer and you have replaced the firewire card in your computer.
If error 23 happened when you install 1394 board, please double check the data cable that is connected your computer to your printer.
SOLUTION:
Change a good quality data cable.
Not use more than 6 feet long data cable. If more than 6 feet cable often cause error 23.
Please use black data cable not use transparent cable on our experience.
1394 Firewire Board
E103898 E102161
If you have a problem of the computer not being able to see your JV3 or JV4 printer and you have replaced the firewire card in your computer.
If error 23 happened when you install 1394 board, please double check the data cable that is connected your computer to your printer.
SOLUTION:
Change a good quality data cable.
Not use more than 6 feet long data cable. If more than 6 feet cable often cause error 23.
Please use black data cable not use transparent cable on our experience.
1199.95USD/Each
Mimaki Printer Parts JV3
Main Board
E103537 E102051
Main Board
E103537 E102051
1699.95USD/Each
Mimaki Printer Parts JV3
IF Board
IF Board
249.95USD/Each
Mimaki Printer Parts JV3
Carriage CR Board
Carriage CR Board
849.95USD/Each
Mimaki Printer Parts JV3
Cap Sensor ASSY
Cap Sensor ASSY
69.95USD/Each
Mimaki Printer Parts JV3
CR Belt
CR Belt
69.95USD/Each
Mimaki Printer Parts JV3
Encoder Strip Sensor
Encoder Strip Sensor
149.95USD/Each
Encoder Strip Mimaki JV3-130
Encoder Strip
Encoder Strip
119.95USD/Each
Encoder Strip Mimaki JV3-160
Encoder Strip
Encoder Strip
139.95USD/Each
Encoder Strip Mimaki JV3-250
Encoder Strip
Encoder Strip
179.95USD/Each
Mimaki Printer Parts JV3
Encode Strip Sensor
Encode Strip Sensor
99.95USD/Each