【 Print Head 】
Mimaki Printer Parts JV34
ID: 1000002201
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.

【 Damper 】
Mimaki Printer Parts JV34
ID: 11959109
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy.

【 Cap Top 】
Mimaki Printer Parts JV34
ID: 10002794
Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy.

【 Pump 】
Mimaki Printer Parts JV34
ID: 7576340000
Cleaning is not performed efficiently because ink is not sucked well. As a result, white or dark lines appear in the printing image.

【 Print Head Cable 31 Pin 14"/36CM 】
Mimaki Printer Parts JV34
ID: 23475206
When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.

【 Print Head Cable 34 Pin 14"/36CM 】
Mimaki Printer Parts JV34
ID: 23475206
When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.

【 Print Head Cable 30 PIN 9'9"/297CM 】
Mimaki Printer Parts JV34
ID: 23475206
When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.

【 Print Head Cable 50 PIN 10'/304CM 】
Mimaki Printer Parts JV34
ID: 23475206
When there is a bad contact with the Flexible cable connected to the head, or there is a cut line in the Flexible cable, the head doesn't work properly.

【 Wiper 】
Mimaki Printer Parts JV34
ID: 11379105
Wiper cannot remove the foreign substances stuck on the surfaceof the head. In that condition, ink is not fired properly and thewhite or dark fine lines appear in the printing image.

【 45 DEGREE SUPER HARD BLADES 】
Mimaki Printer Parts JV34
ID: CG 75 130 160 SRII 60SR Blade 160 SRII 60SR Blade

【 Cutter BLADES 】
Mimaki Printer Parts JV34
ID: CG 75 130 160 SRII 60SR Cutter Knife Blade

【 Pump Tube Solvent Resistance OD=4mm ID=2mm 】
Mimaki Printer Parts JV34
ID:

【 Ink Tube OD=3mm ID=2mm 】
Mimaki Printer Parts JV34
ID:
Ink Tube Solvent Resistance

【 Syringe 】
Mimaki Printer Parts JV34
ID:

【 Encoder Sensor 】
Mimaki Printer Parts JV34
ID:

【 Encoder Strip 260 】
Mimaki Printer Parts JV34 260
ID: