$29.95 USD
【 Damper 】
HP 9000
ID:
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
HP 9000
ID:
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
$29.95 USD
【 Damper 】
Seiko 64
ID:
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
Seiko 64
ID:
Ink cannot be fired correctly and results in missing dot when the head is broken or reaches its life. When the head is electrically broken, it sometimes prints unnecessary lines.
$119.95 USD
【 Encoder Strip 64in 】
HP 8000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
HP 8000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
$119.95 USD
【 Encoder Strip 64in 】
HP 9000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
HP 9000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
$149.95 USD
【 Encoder Strip 100in 】
HP 10000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
HP 10000
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
$119.95 USD
【 Encoder Strip 64in 】
Seiko 64S
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
Seiko 64S
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
$149.95 USD
【 Encoder Strip 100in 】
Seiko 100S
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.
Seiko 100S
ID:
You'll need to make a small hole in each end of this Encoder Strip to attach to the screw or spring and cut it down to match the size of the old one. However, it is a good alternative solution to using Lavaink Encoder Strip at 30% the price than using the original encoder strips. The warranty will be void if Lavaink label at this encoder strip was removed!!! Use sharp knife to cut a small rectangle.
Please try this cut at the same end of encoder strip because I give you enough long to cut. After you are confident, and you can cut the real hole. Should keep the same length as your old one.